Buffing Machine

High productivity – 17 casings (315/80R22.5) per hour.
Optional PLC controls for automatic operation and consistent results. Measure and control the depth of cut, control the rasp head motion, and auto shut-off when under tread is less than a pre-determined setting.
Template controlled system for consistent multi-radius crown buffing
Low connected load and power consumption.
Suitable for bead diameters from 14” to 24.5” and section widths from 140 mm to 470 mm.
* BF 6-3 only

Available Features	BF 6 - 1	BF 6 - 2	BF 6 - 3

Dimensions (L x W x H) (mm / in)	2170 x 1820 x 2360 / 85.4 x 71.7 x 93.0	1750 x 1850 x 2440 / 69.0 x 73.0 x 96.1
Air pressure (kg/cm² / psi)	7.0 / 100
Rasp motor power (kW / hp)	7.5 / 10.0	11.25 / 15.0
Total installed power (kW / hp)	9.5 / 12.75	12.7 / 17.75
* X in Cat. No. denotes power supply specifications (V / Hz / ph)	R - 220 / 60 / 3
	O - 380 / 50 / 3
	S - 380 / 60 / 3
	P - 415 / 50 / 3
	U - 440 / 60 / 3
Auxiliary voltage	24 V-DC
Weight (kg / lb)	550 / 1213	650 / 1433	1242 / 2738
Machine control system	Electrical		PLC control with HMI screen
Buffing location & method	Crown - manual	Crown & shoulder - manual	Crown - auto, shoulder - manual
Upgrade to next version	Factory upgradable to BF 6-2 & 3	actory upgradable to BF 6-3	Not Applicable
Maximum tyre diameter (mm / in)	1300 / 51.2
Minimum tyre diameter (mm / in)	700 / 27.5
Maximum section width (mm / in)	470 / 18.5
Minimum section width (mm / in)	140 / 5.5
Maximum bead diameter (in)	24.5
Minimum bead diameter (in)	14
Maximum bead width (in)	14
Minimum bead width (in)	4