Inspection Spreader - IS 6 series

Casing spreader for internal and external inspection prior to and after retreading.

  • Adjustable bi-directional casing rotation, 3 - 8 revolutions per minute (IS 6-2 & IS 6-3 only).
  • LED lights in the claws for high level of illumination for inside inspection.
  • Additional drive control in hand-held inspection lamp for ease of operation.
  • Adjustable working height for ergonomical and fatigue free operation.
  • Ramp for easy loading and unloading of casings.
  • Optional non-destructive inspection system for detecting nail holes and small injuries (available for IS 6-3 only).
  • Suitable for bead diameters from 14” to 24.5” and bead widths from 4” to 14”.
Inspection Spreader 3D view
IS 6-3
Inspection Spreader ortho views

Technical Data

Model
IS 6-1
IS 6-2
IS 6-3
Catalogue No.
MA05 61 - X*
MA05 62 - X*
MA05 63 - X*
Dimensions (L x W x H) (mm / in)
3000 x 2400 x 1500 / 157.5 x 94.5 x 59.0
Air pressure (kg/cm² / psi)
8.0 / 114
Total installed power (kW / hp)
0.37 / 0.5
* X in Cat. No. denotes power supply specifications (V / Hz / ph)
R - 220 / 60 / 3
O - 380 / 50 / 3
S - 380 / 60 / 3
P - 415 / 50 / 3
U - 440 / 60 / 3
 
 
A - 110/220 / 50/60 / 1
 

 

Auxiliary voltage
24 V-DC
Tyre drive
AC - Single speed
DC - Variable speed
Tyre surface speed (m/s / fpm)
0.16 / 31
0.07-0.16 / 14-31
Weight (kg / lb)
225 / 496
230 / 507
255 / 602
Upgrade to next version
Factory upgradable
Factory upgradable
Not applicable
Maximum tyre diameter (mm / in)
1300 / 51.2
Minimum tyre diameter (mm / in)
700 / 27.5
Maximum section width (mm / in)
470 / 18.5
Minimum section width (mm / in)
140 / 5.5
Maximum bead diameter (in)
24.5
Minimum bead diameter (in)
14.0
Maximum bead width (in)
14.0
Minimum bead width (in)
4.0

Optional Accessories

Vacuum cleaner
Yes
Yes
Yes
NDT system - auto probe positioning
Factory upgradable
Factory upgradable
Field upgradable
NDT system - manual probe positioning
Factory upgradable
Factory upgradable
Field upgradable

Warranty against manufacturing defects is applicable for a period of 6 months from the date of commissioning or 9 months from the date of invoice whichever is earlier, while the bought electrical pneumatic items, etc will not be covered by the manufacturers warranty. Warranty is limited to repair or replacement of defective parts and does not extend to any consequential liability there of.